Textiltransfer för ljusa textilier, 5-pack!

Designa dina egna kläder med hjälp av bilder som du först skriver ut och sedan applicerar på plagget med hjälp av ett strykjärn.

Instruktioner och info på engelska:

Suitable for transferring black&white or color images onto black or dark-colored cotton or cotton mixed fabrics and cloth-covered mouse pads using an iron.

What you need:
• T-shirt transfer paper for dark fabric
• Inkjet printer
• A flat, hard and smooth surface to iron on
• An iron (no travel iron)
• Greaseproof paper (one sheet included in this package)
• Black or dark-colored garment/fabric

Printing:
• Store the transfer paper in its original package in a cool and dry place.
• Only print onto the unprinted, coated side of the transfer film. Select normal mode and NOT mirror mode in your printer settings.
• Use one sheet at the time only.
• Test print onto a sheet of plain paper to make sure that the colors and size are correct.
• Printer settings: Normal paper mode and highest print quality.
• After printing on transfer paper, wait approx. 5 minute before transferring.
• Cut away excess material without leaving a margin around the motif edges. Straight after, peel off the transfer film from the base paper (liner)

Transferring:
• Preheat the iron to the highest setting. DO NOT use steam function!
• You may also use a transfer heat press. Recommended transfer temperature is 200°C (both iron and press).
• Briefly iron the fabric to ensure it’s completely flat.
• Place the printed transfer onto the fabric with the printed image facing up.
• Cover the transfer with the greaseproof paper.
• Iron the transfer applying light pressure. Warm up the transfer evenly with slow circular movements from edge to edge and make sure that the heat is evenly transferred over the entire area. Be extra careful along edges and corners.
• Iron for max. 4 minutes for motif on A4 sheet. For smaller motif use shorter amount of time.
• Allow the transfer to cool off for at least 1 minute, then peel off the greaseproof paper in a smooth, even movement.
• It is possible to use the same greasproof paper several times. Just make sure there’s no ink left on it.
 
Washing:
• Wait 24 hours before washing the first time.
• The garment/fabric has to be completely dry.
• Wash the printed garment/fabric inside out at 30°C.
• Do not use washing detergents or bleach of any kind.
• Do not tumble-dry.
• Iron only on reverse side

If the printing starts to look dull after some washes, you may revitalize it by iron it again. Cover the picture with a greaseproof paper, iron for a few seconds and peel the greaseproof paper off after cooling.